Engineering sulfur defective Bi2S3@C with remarkably enhanced electrochemical kinetics of lithium-ion batteries.

Introducing the appropriate vacancies to augment the active sites and improve the electrochemical kinetics while maintaining high cyclability is a major challenge for its widespread application in electrochemical energy storage. Here, core-shell structured Bi2S3@C with sulfur vacancies was prepared by hydrothermal method and one-step carbonization/sulfuration process, which significantly improves the intrinsic electrical conductivity and ion transport efficiency of Bi2S3. Additionally, the uniform protective carbon layer around surface of composite maintains structural stability and effectively alleviates volume expansion during alloying/dealloying. As a result, the BSC-500 anode exhibits a brilliant reversible capacity of 636 mAh/g at 0.2 A/g and a long-term stable capacity of 524 mAh/g for 500 cycles at a high current density of 3 A/g in lithium-ion batteries. In addition, the assembled Bi2S3@C//LiCoO2 full cell delivered a capacity of 184 mAh/g at 1 A/g and excellent cyclability (125 mAh/g after 1000 cycles). The proposed strategy of combining sulfur vacancies with a core-shell structure to improve the electrochemical kinetics of Bi2S3 in lithium-ion batteries off the prospect for practical applications of transition metal sulfide anodes.

Construction of WS2/NC@C nanoflake composites as performance-enhanced anodes for sodium-ion batteries.

The development of layered metal sulfides with stable structure and accessible active sites is of great importance for sodium-ion batteries (SIBs). Herein, a simple liquid-mixing method is elaborately designed to immobilize WS2 nanoflakes on N-doped carbon (NC), then further coat carbon to produce WS2/NC@C. In the formation process of this composite, the presence of NC not only avoids the overlap and improves the dispersion of WS2 nanoflakes, but also creates a connection network for charge transfer, where the wrapped carbon provides a stable chemical and electrochemical reaction interface. Thus, the composite of WS2/NC@C exhibits the desired Na+ storage capacity as anticipated. The reversible capacity reaches the high value of 369.8 mA h g-1 at 0.2 A g-1 after 200 cycles, while excellent rate performances and cycle life are also acquired in that capacity values of 256.7 and 219.6 mA h g-1 at 1 and 5 A g-1 are preserved after 1000 cycles, respectively. In addition, the assembled sodium-ion hybrid capacitors (SIHCs, AC//WS2/NC@C) exhibit an energy/power density of 68 W h kg-1 at 64 W kg-1, and capacity retention of 82.9% at 1 A g-1 after 2000 cycles. The study provides insight into developing layered metal sulfides with eminent performance of Na+ storage.

Facile Solid-State Chemical Synthesis of CoMoO4 Nanorods for High-Performance Supercapacitors.

The development of electrode materials with excellent performance serves as the key for researchers to enhance the energy density of supercapacitors. Cobalt molybdate (CoMoO4) nanomaterials have been regarded as one of the most prospective electrode materials for supercapacitors due to their high theoretical capacitance and excellent electrical conductivity. In this paper, three kinds of CoMoO4 nanorods were prepared directly via simple and environmentally friendly solid-phase chemical reactions with solid inorganic salts as raw materials. According to X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) test results, different reagents had certain effects on the size and morphology of CoMoO4, and these affected its electrochemical performance. In particular, the samples prepared with Co(NO3)2·6H2O as raw material took on a more uniform micromorphology, with a better crystallinity. Simultaneously, electrochemical test results showed that the samples synthesized with Co(NO3)2·6H2O presented relatively good electrical conductivity and a large specific capacitance (177 F g-1). This may be due to the nitrates reacting more slowly during the reaction and the crystals having difficulty aggregating during growth. Therefore, the structure of the prepared CoMoO4 nanomaterial was more uniform, and it was resistant to collapse during the charging and discharging process; thus, the capacitor presents the best performance.

Construction of MXene/Bi2WO6 Schottky Junction for Highly Efficient Piezocatalytic Hydrogen Evolution and Unraveling Mechanism.

For the first time, a series of MXene (Ti3C2Tx)/Bi2WO6 Schottky junction piezocatalysts were constructed, and the piezocatalytic hydrogen evolution activity was explored. Optimal Ti3C2Tx/Bi2WO6 exhibits the highest piezocatalytic hydrogen evolution rate of 764.4 µmol g-1 h-1, which is nearly 8 times higher than that of pure Ti3C2Tx and twice as high as that of Bi2WO6. This value also surpasses that of most recently reported typical piezocatalysts. Moreover, related experimental results and density functional theory calculations reveal that Ti3C2Tx/Bi2WO6 can provide unique channels for efficient electron transfer, enhance piezoelectric properties, optimize the adsorption Gibbs free energy of water, reduce activation energy for hydrogen atoms, endow robust separation capacity of charge carrier, and restrict the electron-hole recombination rate, thus significantly promoting the efficiency of hydrogen evolution reaction. Ultimately, we have unraveled an innovative piezocatalytic mechanism. This work broadens the scope of MXene materials in a sustainable energy piezocatalysis application.

Artificial Surface Electron Network Prompted Energy Band Structure Tuning: Boosting Solar-to-Hydrogen Evolution Performance.

The energy gap and conduction band position of catalysts play crucial roles in solar-to-hydrogen (STH) transformation technology. Unfortunately, although an increase in the conduction band position can effectively promote the photoreduction capacity of the photocatalyst, it will inevitably widen the band gap, thus reducing the light-absorption scale. It seems that there is a contradiction between the reduction of band gap and the improvement of conduction band position, which is that "You can't have your cake and eat it too." Herein, an ultrasimple molecular adsorption strategy was engineered by adsorbing hydrazine hydrate on the surface of TiO2. The theoretical and experimental results indicated that the strong electron-donating effect of amino groups in hydrazine hydrate can promote the redistribution of photogenerated electrons and form surface electron networks on the surface of TiO2 photocatalysts, which can bend the conduction band upward and significantly improve its photoreduction ability. Besides, the adsorption of -NH2 can narrow the band gap width of TiO2 and promote the separation efficiency of photogenerated carriers. More interestingly, it can also effectively enhance the adsorption of H2O and H+, thus greatly elevating the STH efficiency. The STH rate of the as-prepared T-N-3 can be increased by ≈530%. This work sheds light on a new approach for resolving the contradiction between photoreduction and light absorption capabilities to effectively enhance photocatalytic performance.

Hsa_circ_0005397 promotes hepatocellular carcinoma progression through EIF4A3.

PURPOSE: The purpose of this study was to explore the expression and potential mechanism of hsa_circ_0005397 in hepatocellular carcinoma progression. METHODS: Quantitative reverse transcription-polymerase chain reaction(qRT-PCR) was used to measure the expression level of hsa_circ_0005397 and EIF4A3 from paired HCC tissues and cell lines. Western Blot (WB) and immunohistochemistry (IHC) were used to verify the protein level of EIF4A3. The specificity of primers was confirmed by agarose gel electrophoresis. Receiver Operating Characteristic (ROC) Curve was drawn to analyze diagnostic value. Actinomycin D and nuclear and cytoplasmic extraction assays were utilized to evaluate the characteristics of hsa_circ_0005397. Cell Counting kit-8 (CCK-8) and colony formation assays were performed to detect cell proliferation. Flow cytometry analysis was used to detect the cell cycle. Transwell assay was performed to determine migration and invasion ability. RNA-binding proteins (RBPs) of hsa_circ_0005397 in HCC were explored using bioinformatics websites. The relationship between hsa_circ_0005397 and Eukaryotic Translation Initiation Factor 4A3 (EIF4A3) was verified by RNA Binding Protein Immunoprecipitation (RIP) assays, correlation and rescue experiments. RESULTS: In this study, hsa_circ_0005397 was found to be significantly upregulated in HCC, and the good diagnostic sensitivity and specificity shown a potential diagnostic capability. Upregulated expression of hsa_circ_0005397 was significantly related to tumor size and stage. Hsa_circ_0005397 was circular structure which more stable than liner mRNA, and mostly distributed in the cytoplasm. Upregulation of hsa_circ_0005397 generally resulted in stronger proliferative ability, clonality, and metastatic potency of HCC cells; its downregulation yielded the opposite results. EIF4A3 is an RNA-binding protein of hsa_circ_0005397, which overexpressed in paired HCC tissues and cell lines. In addition, expression of hsa_circ_0005397 decreased equally when EIF4A3 was depleted. RIP assays and correlation assay estimated that EIF4A3 could interacted with hsa_circ_0005397. Knockdown of EIF4A3 could reverse hsa_circ_0005397 function in HCC progression. CONCLUSIONS: Hsa_circ_0005397 promotes progression of hepatocellular carcinoma through EIF4A3. These research findings may provide novel clinical value for hepatocellular carcinoma.

High quality bifunctional cathode for rechargeable zinc-air batteries using N-doped carbon nanotubes constrained CoFe alloy.

Building efficient and stable bifunctional electrocatalysts toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is crucial for the advancement of rechargeable zinc-air batteries (ZABs). Here, a convenient in situ strategy is reported to controllably encapsulate CoFe alloy nanoparticles within N-doped carbon nanotubes (CoFe@NCNT). The abundant Co(Fe)-Nx active sites and the synergistic interaction between CoFe alloys and carbon nanotubes facilitate mass transfer and interfacial charge transfer, resulting in excellent dual functional electrocatalytic activity of OER/ORR with minor potential difference (ΔE = 0.73 V). Thus, the corresponding rechargeable ZAB displays high power density (194 mW cm-2), excellent specific capacity (795 mAh gZn-1), and favorable stability (900 cycles@5 mA cm-2). This work provides an approach for establishing low-cost bultifunctional electrocatalysts with excellent performance of non-noble metal nanoalloys.

Strongly Coupled Heterostructured CoP/MoO2 as an Advanced Electrocatalyst for Urea-Assisted Water Electrolysis.

Developing low-cost electrocatalysts with excellent activity and durability in urea-assisted water splitting is urgently needed in order to achieve sustainable hydrogen production. Herein, we in situ synthesized a robust coupled heterostructured electrocatalyst (CoP/MoO2) on a nickel foam (NF) substrate and explored its electrocatalytic performances in the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and urea oxidation reaction (UOR). The overpotential of CoP/MoO2/NF is found to be only 11 mV at 10 mA cm-2 during the HER process, which is significantly lower than that of commercial Pt/C. Meanwhile, the UOR catalytic performance of CoP/MoO2/NF indicates fast reaction kinetics, along with a considerable low driving potential (1.26 V) compared to that of the OER (1.51 V). In situ and ex situ techniques demonstrate that these excellent electrocatalytic properties are mainly ascribed to the effective synergistic coupled effect and strong electronic interactions between single-component CoP and MoO2, which can tune electronic states of Co and Mo, expose more active sites, enhance intrinsic catalytic activity, and accelerate charge transfer. Moreover, when used in electrochemical overall water splitting and urea-assisted water electrolysis, CoP/MoO2/NF can reach a current density of 10 mA cm-2 at only 1.46 and 1.32 V. This outperforms Pt/C||RuO2 and numerous nonprecious metal electrocatalysts and maintains a stable long-term electrolytic operation for 84 h. This work provides a promising pathway for the development of efficient catalysts during urea-assisted water electrolysis for hydrogen production.

Ce-regulating defect and morphology engineering for efficiently enhancing the piezocatalytic performances of BiOBr.

Cerium-doped bismuth oxybromide (1%, 5% and 10% Ce-BiOBr) piezocatalysts were synthesized. The piezocatalytic activity was efficiently regulated by defect and morphology engineering. Among them, the 5% Ce-BiOBr exhibits the highest piezocatalytic hydrogen production property with an evolution rate of 1147.6 µmol g-1 h-1, nearly twice that of the original BiOBr. Additionally, the MO dye degradation efficiency of 5% Ce-BiOBr reaches 91.9% within 60 min, with a higher reaction kinetic constant (0.0376 min-1) that was 6.1 times larger than that of pure BiOBr. These outstanding performances of 5% Ce-BiOBr surpass those of most other piezocatalytic material systems.

Breast carcinoma arising in a fibroadenoma: A case series of 16 patients and review of the literature.

Breast carcinoma arising from a fibroadenoma is an uncommon entity and is frequently detected incidentally during pathological examination or excisional biopsy of a benign breast tumor. Due to only sporadic cases being reported, evidence-based guidelines are not well-established to date. The present report describes 16 patients diagnosed with breast carcinoma arising within a fibroadenoma in the Third Hospital of Nanchang (Nanchang, China) between January 2019 and December 2021 and discusses the clinicopathological characteristics, imaging findings and treatment. The age of patients at diagnosis ranged between 19 and 58 years and a well-defined asymptomatic mass was the most common clinical presentation. Carcinoma occurring in fibroadenoma generally mimics a benign tumor and potential carcinomatous changes may not be detected. Pathologically, carcinoma in situ was the predominant subtype in the present study. Additionally, ductal carcinoma in situ was more common compared with lobular carcinoma in situ in the present case series. Regarding the molecular phenotypes, the majority of cases were categorized as luminal subtype, although other subtypes such as triple-negative and HER2 positive breast cancer were also identified. In the present study, seven patients were treated with breast-conserving surgery and nine patients were treated with mastectomy. Sentinel lymph node biopsy was performed in all patients and none exhibited axillary node metastasis. Additionally, six patients underwent radiotherapy and two received chemotherapy. During the follow-up, all patients were alive and no evidence of disease relapse was observed. In summary, clinicians should be aware of the possibility of carcinoma within a fibroadenoma, which could alter the therapeutical course. Adequate biopsy or excision should be performed in patients with indicators of malignant transformation in a presumed benign breast tumor.

2D heterostructural Mn2O3 quantum dots embedded N-doped carbon nanosheets with strongly stable interface enabling high-performance sodium-ion hybrid capacitors.

The ingenious architectural structural engineering is extensively identified as a cogent means for facilitating the electrochemical properties of conversion-type anode materials for sodium-ion storage. Herein, a delicate, scalable and controllable solvent-free strategy is proposed to synthesize ultrafine Mn2O3 quantum dots embedded into N-doped carbon to generate two-dimensional (2D) composites (MNC) with robust interfacial heterostructural interactions for high sodium ion storage and fast reaction kinetics, which averts the use of solvents and environmental pollution, greatly reduces time and production costs. The introduction of metallic Mn species simultaneously achieves the construction of ultrafine Mn2O3 quantum dots and strong interfacial heterostructural COMn bonds between metal species and 2D N-doped carbon matrix. The synergistic effect of the formation of oxide quantum dots, the combination of 2D N-doped carbon and the construction of robust interfacial interactions provides the stable electrode structure, fast reaction kinetics and high electrochemical storage capability of anode materials. Hence, MNC composites in SIBs convey remarkable reversible rate capability. Its superior capacity reaches 215 mAh g-1 for 50 cycles at 0.2 A g-1 and 155 mAh g-1 for 1000 cycles at a high current density of 5 A g-1, which shows good long-term stability. The assembled sodium-ion hybrid capacitors (SIHCs) device delivers outstanding energy density of 138 Wh kg-1 at a power density of 126 W kg-1 and 98% capacity retention after 2000 cycles at 2 A g-1, and tremendous capability for practical applications (69 LEDs can be easily lighted). This work not merely offers guidance for the rational interfacial engineering design of high-capacity Mn-based electrode materials in a feasible and scalable solvent-free tactics for Na+ storage, but also broadens the routes for projecting a better electrode material for other battery systems.

Clinical study of standard residual liver volume and transient elastography in predicting poor prognosis of patients after hemihepatectomy.

BACKGROUND: Liver cancer resection, especially in patients with hemihepatectomy or extended hemihepatectomy, often leads to poor prognosis, such as liver insufficiency and even liver failure and death, because the standard residual liver volume (SRLV) cannot be fully compensated after surgery. AIM: To explore the risk factors of poor prognosis after hemihepatectomy for hepatocellular carcinoma and evaluate the application value of related prognostic approaches. METHODS: The clinical data of 35 patients with primary liver cancer in Nantong Third People's Hospital from February 2016 to July 2020 were retrospectively analyzed. The receiver operating characteristic curve was created using medcac19.0.4 to compare the critical values of the SRLV in different stages of liver fibrosis after hemihepatectomy with those of liver dysfunction after hemihepatectomy. It was constructed by combining the Child-Pugh score to evaluate its application value in predicting liver function compensation. RESULTS: The liver stiffness measure (LSM) value and SRLV were associated with liver dysfunction after hemihepatectomy. Logistic regression analysis showed that an LSM value ≥ 25 kPa [odds ratio (OR) = 6.254, P < 0.05] and SRLV ≤ 0.290 L/m2 (OR = 5.686, P < 0.05) were independent risk factors for postoperative liver dysfunction. The accuracy of the new liver reserve evaluation model for predicting postoperative liver function was higher than that of the Child-Pugh score (P < 0.05). CONCLUSION: SRLV and LSM values can be used to evaluate the safety of hemihepatectomy. The new liver reserve evaluation model has good application potential in the evaluation of liver reserve function after hemihepatectomy.

Safety of COVID-19 Vaccination in Patients With Breast Cancer: Cross-Sectional Study in China.

BACKGROUND: The widespread use of vaccines against the novel coronavirus disease (COVID-19) has become one of the most effective means to establish a population immune barrier. Patients with cancer are vulnerable to COVID-19 infection, adverse events, and high mortality, and should be the focus of epidemic prevention and treatment. However, real-world data on the safety of vaccines for patients with breast cancer are still scarce. OBJECTIVE: This study aims to compare the safety of COVID-19 vaccines between patients vaccinated before or after being diagnosed with breast cancer. METHODS: Patients with breast cancer who sought medical advice from October 2021 to December 2021 were screened. Those who received COVID-19 vaccines were enrolled in this study to analyze the safety of the vaccines. The primary outcome was patient-reported adverse events (AEs). All events after vaccine injection were retrospectively documented from the patients. RESULTS: A total of 15,455 patients with breast cancer from 41 hospitals in 20 provinces in China were screened, and 5766 patients who received COVID-19 vaccines were enrolled. Of those enrolled, 45.1% (n=2599) of patients received vaccines before breast cancer diagnosis, 41.3% (n=2379) were vaccinated after diagnosis, and 13.6% (n=784) did not known the accurate date of vaccination or cancer diagnosis. Among the patients vaccinated after diagnosis, 85.4% (n=2032) were vaccinated 1 year after cancer diagnosis and 95.4% (n=2270) were vaccinated during early-stage cancer. Of all 5766 vaccinated patients, 93.9% (n=5415) received an inactivated vaccine, 3.7% (n=213) received a recombinant subunit vaccine, and 2.4% (n=138) received other vaccines, including adenovirus and mRNA vaccines. In the first injection of vaccines, 24.4% (n=10, 95% CI 11.2-37.5) of patients who received an adenovirus vaccine reported AEs, compared to only 12.5% (n=677, 95% CI 11.6-13.4) of those who received an inactivated vaccine. Patients with metastatic breast cancer reported the highest incidence of AEs (n=18, 16.5%, 95% CI 9.5-23.5). Following the second injection, patients who received an inactivated vaccine (n=464, 8.7%, 95% CI 8.0-9.5) and those who received a recombinant vaccine (n=25, 8.7%, 95% CI 5.5-12.0) reported the same incidence of AEs. No significant differences in patient-reported AEs were found between the healthy population and patients with breast cancer (16.4% vs 16.9%, respectively); the most common AEs were local pain (11.1% vs 9.1%, respectively), fatigue (5.5% vs 6.3%, respectively), and muscle soreness (2.3% vs 3.6%, respectively). The type of vaccine and time window of vaccination had little impact on patient-reported AEs. CONCLUSIONS: Compared with patients vaccinated before breast cancer diagnosis, there were no significant differences in patient-reported AEs in the patients vaccinated after diagnosis. Thus, it is safe for patients with breast cancer, especially for those in the early stage, to receive COVID-19 vaccines. TRIAL REGISTRATION: Chinese Clinical Trial Registry ChiCTR2200055509; https://tinyurl.com/33zzj882.

Structure and Defect Engineering of V3 S4-x Sex Quantum Dots Confined in a Nitrogen-Doped Carbon Framework for High-Performance Sodium-Ion Storage.

Constructing quantum dot-scale metal sulfides with defects and strongly coupled with carbon is significant for advanced sodium-ion batteries (SIBs). Herein, Se substituted V3 S4 quantum dots with anionic defects confined in nitrogen-doped carbon matrix (V3 S4-x Sex /NC) are fabricated. Introducing element Se into V3 S4 crystal expands the interlayer distance of V3 S4 , and triggers anionic defects, which can facilitate Na+ diffusions and act as active sites for Na+ storage. Meanwhile, the quantum dots tightly encapsulated by conductive carbon framework improve the stability and conductivity of the electrode. Theoretical calculations also unveil that the presence of Se enhances the conductivity and Na+ adsorption ability of V3 S4-x Sex . These properties contribute to the V3 S4-x Sex /NC with high specific capacity of 447 mAh g-1 at 0.2 A g-1 , and prominent rate and cyclic performance with 504 mAh g-1 after 1000 cycles at 10 A g-1 . The sodium-ion hybrid capacitors (SIHCs) with V3 S4-x Sex /NC anode and activated carbon cathode can achieve high energy/power density (maximum 144 Wh kg-1 /5960 W kg-1 ), capacity retention ratio of 71% after 4000 cycles at 2 A g-1 . This work not only synthesizes V3 S4-x Sex /NC, but also provides a promising opportunity for designing quantum dots and utilizing defects to improve the electrochemical properties.

circSLCO1B7 suppresses the malignant progression of hepatocellular carcinoma via the miR-556-3p/DAB2IP axis.

Circular RNAs (circRNAs) are noncoding RNAs with a circular colsed structure that play an important role in the occurrence and development of cancers. The functional mechanism of circRNAs as ceRNAs in hepatocellular carcinoma (HCC) and its effect on the invasion and metastasis of HCC need to be further studied. Five pairs of HCC tissues were selected for high-throughput sequencing, and 19 circRNAs with differential expression were obtained. The expression of circSLCO1B7 was obviously downregulated in 50 pairs of tumor tissues and plasma of HCC patients, which was closely related to the TNM stage, lymph node metastasis and tumor size. Cell functional experiments showed that circSLCO1B7 could inhibit cell growth, migration, invasion and promote cell apoptosis. In the regulatory mechanism, circSLCO1B7 sponged miR-556-3p to regulate the expression of the downstream target gene DAB2IP and induced the Epithelial-mesenchymal transition (EMT) progression. Our results indicated that circSLCO1B7 significantly inhibits the metastasis of HCC via the miR-556-3p/DAB2IP axis. Thus, circSLCO1B7 is a good candidate as a therapeutic target.

Clinical and pathological characteristics of acute kidney injury caused by diquat poisoning.

Introduction: Diquat poisoning leads to kidney injury, hepatotoxicity, rhabdomyolysis, gastrointestinal hemorrhage, and respiratory failure. Diquat has high mortality and no specific antidote. The pathology of acute kidney injury caused by diquat poisoning has been mainly investigated in animal studies and autopsies, and typically shows renal tubular necrosis. To our knowledge, antemortem renal biopsy has not been reported in humans.Case reports: Two males and one female presented following deliberate diquat self-poisoning. Their main clinical manifestations were abdominal pain, nausea, and emesis. All developed acute kidney injury. Kidney biopsy was performed in two cases which showed acute tubular necrosis with renal interstitial edema and multifocal inflammatory cell infiltration. Treatments given included gastric lavage, catharsis, early hemoperfusion combined with continuous kidney replacement therapy or hemodialysis, administration of glucocorticoids, and antioxidant therapy. All patients survived.Discussion: Despite potentially lethal ingestions three patients survived oral diquat poisoning with intensive supportive care. No clear relationship can be made between any of the therapies given and patient outcome.Conclusions: Kidney biopsy in these patients confirmed proximal renal tubular injury was the major pathological finding although interstitial injury was also present. The role of therapies that address renal pathology requires further study.

Assessing the potential risks, sources and the relationship between the dissolved and particulate polycyclic aromatic hydrocarbons (PAHs) in the typical semi-enclosed bay, Bohai Bay of China.

This study aimed to investigate the spatial and temporal distribution as well as the partitioning behavior of dissolved and particulate polycyclic aromatic hydrocarbons (PAHs) during the summer and autumn seasons of 2020. It was found that the average concentration of PAHs in surface seawater was significantly higher in autumn (58.16 ng L-1) than in summer (40.47 ng L-1) due to a large amount of input in autumn and more photodegradation and biodegradation affected by higher temperatures in summer. The spatial distribution indicated that the river had a significant dilution effect on PAHs in summer and became a significant input source in autumn. In addition, a large number of oil and gas development platforms were distributed throughout the Bohai Bay, and the discharge of production and domestic sewage contributed to the PAHs pollution level. As a semi-enclosed bay, the water exchange capacity of Bohai Bay was poor, leading to a greater accumulation of PAHs in the marine environment. The diagnostic ratios and PCA-MLR indicated that petroleum was the most important source of PAHs with a contribution of 45%, followed by fuel combustion (39%) such as coal and oil. Photooxidation in seawater resulted in a reduction of BaP/BeP, indicating that seasonal variations in photooxidation had a significant impact on the composition of PAHs (summer: 1.49, autumn: 2.96). The concentration of particulate PAHs was correlated with the concentration of dissolved PAHs and SPM, and the proportion of 3-rings (43.8%) and 4-rings (49.8%) PAHs was significantly higher on SPM. The distribution coefficients Log Kd and φspm-water showed a trend of increasing and then decreasing as the number of rings increased, with the 4-rings Pyr exhibiting the highest value. According to the ecological risk assessment, the ecological risk of total PAHs was low (RQNCs < 800, RQMECs < 1), but the ecological risk of individual PAHs and the carcinogenicity of high-ring PAHs could not be ignored (＞96.5%). This study is significant for investigating the "sources and sinks" of PAHs in the complex marine environment by analyzing the partitioning behavior of PAHs in different phases.

Inhibitory effect of bilobalide on Staphylococcus aureus von Willebrand factor-binding protein and its therapeutic effect in mice with pneumonia.

AIMS: Disabling bacterial virulence with small molecules has been proposed as a potential strategy to prevent bacterial pathogenicity. The von Willebrand factor-binding protein of Staphylococcus aureus was identified previously as a key virulence determinant. Our objective was to discover a von Willebrand-factor binding protein (vWbp) inhibitor distinct from the antibiotics used to prevent infections resulting from S. aureus. METHODS AND RESULTS: Using coagulation assays, we found that the sesquiterpene trilactone bilobalide blocks coagulation mediated by vWbp, but has no impact on the growth of S. aureus at a concentration of 128 µg ml-1. Moreover, a mouse model of pneumonia caused by S. aureus indicated that bilobalide could attenuate S. aureus virulence in vivo. This effect is achieved not by interfering with the expression of vWbp but by binding to vWbp, as demonstrated by western blotting, thermal shift assays, and fluorescence quenching assays. Using molecular dynamic simulations and point mutagenesis analysis, we identified that the Q17A and R453A residues are key residues for the binding of bilobalide to vWbp. CONCLUSIONS: Overall, we tested the ability of bilobalide to inhibit S. aureus infections by targeting vWbp and explored the potential mechanism of this activity.

Encapsulated papillary carcinoma of the breast: A single institution experience.

Encapsulated papillary carcinoma (EPC) is a relatively rare form of breast cancer. To date, no evidence-based guidelines for the treatment of EPC have been established. Between January 2015 and December 2021, patients with histologically confirmed EPC of the breast were recorded in a database by The Third Hospital of Nanchang City (Nanchang, China). A total of 46 patients with EPC were retrieved from the database. Age at diagnosis ranged from 41-88 years (median age, 62 years). A total of 21 of these patients had pure EPC, 6 patients had EPC associated with ductal carcinoma in situ and 19 patients had EPC associated with invasive carcinoma. The majority of EPC cases were low nuclear grade, hormone receptor-positive and human epidermal growth factor receptor-2-negative. Additionally, myoepithelial cells were always absent in the papillae of the EPC. All patients underwent lumpectomy or mastectomy with sentinel lymph node biopsy, and almost all of the patients received adjuvant hormonal therapy. Adjuvant chemotherapy was only suggested to 4 patients who were diagnosed with axillary lymph node involvement. Subsequently, the clinicopathological features of non-invasive EPC were compared with invasive EPC. The results indicated that larger tumor sizes and axillary lymph node metastases were more common in invasive tumors. During the follow-up, only 2 patients with invasive EPC experienced recurrence or metastasis. In conclusion, a substantial proportion of invasive EPC cases display aggressive characteristics and metastatic potential, despite it being considered a subtype of carcinoma in situ with excellent prognosis, and local surgical resection is the initial method of treatment. Therefore, adjuvant endocrine therapy, radiotherapy and chemotherapy should be considered in select patients, especially in those diagnosed with invasive EPC tumors.

Acceleration of Photocatalytic CO2 Reduction at Intimate Interface in AgBr/BiOBr Heterojunctions via a Co-anion Strategy.

Constructing heterojunctions with strong interfacial interactions can accelerate the transfer and separation of photogenerated charge carriers. However, finding a simple strategy to construct tightly connected heterojunctions remains a major challenge. In this work, AgBr/BiOBr S-scheme heterojunctions were designed via a straightforward co-anionic strategy without using a solvent. The experimental results indicate that the AgBr/BiOBr heterojunction with a close contact interface can extend the use of visible light, accelerate the separation, and induce the transfer of photoelectrons and holes while maintaining an excellent redox capacity. Undoubtedly, the photocatalytic reduction rate of carbon dioxide to carbon monoxide by 1.0 AgBr/BiOBr is 87.73 µmol·g-1·h-1 (quantum efficiency is 0.57%), which is 12.15 times and 4.45 times higher than that of pure AgBr and BiOBr, respectively. The present work provides insights into a simple strategy for the preparation of strongly interacting interfacial heterojunctions for photocatalytic CO2 reduction.